[tabs slidertype=”top tabs”] [tabcontainer] [tabtext]产品介绍[/tabtext] [tabtext]技术参数[/tabtext] [tabtext]资料下载[/tabtext] [/tabcontainer] [tabcontent] [tab]
The ViscoScope VS-4450 transmitter has an alphanumeric display, alarm LED‘s and push buttons for configuration. The model ViscoScope VS-B450 has the same functionality as the VS-4450 but only has the watchdog timer single LED indicator. Both transmitters can be configured with a PC or optional graphical touch panel. For transmission of the measured parameters standard analog and serial outputs are available.
The transmitter can be located up to 1000 meters away from the sensor. If the sensor is located in a hazardous area, safety barriers will be used for either ATEX or CSA International approval. The available approval ratings for the complete system with safety barriers are: ATEX: II 1/2 G EEx ia IIC T3 – T6 and CSA International Class I, Div I, Group C and D
VS-4450 and VS-B450 transmitters in 19″ rack
[/tab] [tab]
- Technology
- Fast analog PID control loop for viscosity sensor
- Compatible with all sensors
- Measured parameters
- Viscosity
- Temperature of process, coils and microprocessor
- Resonant frequency for sensor diagnostics
- Display
- 8-line alphanumeric display, divided into 2 pages
- Each page configurable for a maximum of 4 parameters
- Configuration
- Via 3 push buttons on the front panel of the VS-4450
- Via a PC computer with VisConfig software
- Outputs
- Integrated front panel RS232 output, Modbus protocol
- 4 slots for analog and serial outputs
- 2 SPDT Relays for alarms
- Power supply
- 95 … 260 VAC, 50 … 60 Hz, 15 Watt
- Optional: 24 VDC / VAC
VS-4450 transmitter in wall mount housing
[/tab] [tab][email-download download_id=”7″ contact_form_id=”1″][/tab] [/tabcontent] [/tabs]